BÖWE MultiSolvent - M12

Technical Data

A Safe Future withMultiSolvent®
Also with the 12 to 18 kg capacity 6th Ge-neration machines we no longer differentiate between hydrocarbon and other alternative  solvents. The new small MultiSolvent® machines are suitable for all class A III chlorine-free  solvents with a flash point greater than 55°C and that are lighter than water (e.g. HC or cy-closiloxanes like  GreenEarth® ). By simply chang ing software settings, all functions and processes are adjusted to the solvent  chosen. So, you can see your future and  your investment are safe with the new BÖWE  MultiSolvent® machines.

The Multi-Purpose-Design
The M12, M15, and M18 were designed to exactly meet your needs also with regards to space. There are two ways  to have your machine installed - slimline or crossline - whatever your shop dictates. Slimline: here, the still is  located behind the machine. Crossline: the still is set up at the side of the machine. All that with an entry height of  less than 2000 mm.

 

Basic Setting & Options  

Power Drying System
Especially when cleaning with high-boiling solvents, drying of the garments is of utmost  importance. The BÖWE Power Drying System has been further optimized by the new aerodynamic recovery section in the 6th Generation. With this system you will achieve excellent drying results and unbeatably short cycle times. You will also notice the impact of gentle drying on cleaning results and the feel of garments, which will make ironing easier.

Comfort with Cleaning of the Machine
Cleaning intervals for the filter are unusually extended, due to the especially large proven lint filters. The three standard tanks and water separator are self-cleaning. Optionally, the machines  are also available with a second filter.



Maintenance Made easy with IMS (Interactive Maintenance System)
IMS - what does that mean? These are automatic maintenance programs, as well as two additional multi-maintenance programs, that bundle maintenance steps and intelligently have them run simultaneously. The machine shows when maintenance is required and certain maintenance cycles like e.g. filter maintenance are performed without any manual interference. However, you do not have to worry about losing control over your machine. The machine only provides suggestions, but you certainly decide when maintenance is performed.

Self-Cleaning Solvent Tanks
New tank geometry offers particularly diagonal tank grounds and the solvent exhaust at the deepest point. Together with the modern working on technology for smoother surfaces the tanks permit 3 practically no more deposits.

Variable Speed Drive and EBS®
We have increased the extraction speed of the MultiSolvent® machines. Extraction is now done at a speed of up to 600 rpm as a standard. The BÖWE M12/15/18 MultiSolvent® machines are equipped with a variable speed drive and EBS® (Electronic Balancing System) as standard, so imbalances during extraction are avoided electronically. You can  perform extraction without any problems, even if the machine is not fully loaded. The variable speed drive with its  infinitely variable speed control provides for a gentle cleaning cycle that can be individually adjusted for any type of garments.

Safety
In order to guarantee safety even with potentially flammable hydrocarbon solvents, multiple independent safety  arrangements are designed into all BÖWE MultiSolvent® machines. These safety devices guarantee 100 % safety, even  if several unfavorable events should coincide.