BÖWE MultiSolvent - M26

A Safe Future withMultiSolvent®
Also with the 21 to 30 kg capacity 6th Ge-neration machines we no longer differentiate between hydrocarbon and other alternative  solvents. The new small MultiSolvent® machines are suitable for all class A III chlorine-free  solvents with a flash point greater than 55°C and that are lighter than water (e.g. HC or cy-closiloxanes like  GreenEarth® ). By simply chang ing software settings, all functions and processes are adjusted to the solvent  chosen. So, you can see your future and  your investment are safe with the new BÖWE  MultiSolvent® machines.

BÖWE MultiSolvent® = High-tech MultiSolvent
With BÖWE MultiSolvent® machines you can be sure of the best quality. Specially perfected process technology  ensures the machines are optimally adjusted to all relevant solvents. BÖWE has also cracked the problem with  biodegradable solvents that has got others stymied: creation of odour. In order to best separate water and low-boiling liquids from the solvents and thus practically eliminate creation of odour, a frac-tional still and an  automatic multistep water separator are absolutely necessary. It goes without saying that these features are  stan-dard with BÖWE MultiSolvent®  machines

Basic Setting & Options  

Power Drying System
Especially when cleaning with high-boiling solvents, drying of the garments is of utmost  importance. The BÖWE Power Drying System has been further optimized by the new aerodynamic recovery section in the 6th Generation. With this system you will achieve excellent drying results and unbeatably short cycle times. You will also notice the impact of gentle drying on cleaning results and the feel of garments, which will make ironing easier.

Comfort with Cleaning of the Machine
Cleaning intervals for the filter are unusually extended, due to the especially large proven lint filters. The three standard tanks and water separator are self-cleaning. Optionally, the machines  are also available with a second filter.

Maintenance Made easy with IMS (Interactive Maintenance System)
IMS - what does that mean? These are automatic maintenance programs, as well as two additional multi-maintenance programs, that bundle maintenance steps and intelligently have them run simultaneously. The machine shows when maintenance is required and certain maintenance cycles like e.g. filter maintenance are performed without any manual interference. However, you do not have to worry about losing control over your machine. The machine only provides suggestions, but you certainly decide when maintenance is performed.

Self-Cleaning Solvent Tanks
New tank geometry offers particularly diagonal tank grounds and the solvent exhaust at the deepest point. Together with the modern working on technology for smoother surfaces the tanks permit 3 practically no more deposits.